Installing The Smartprep 065 Program - Micromeritics SmartPrep 065 Operator's Manual

Installation

Installing the SmartPrep 065 Program

1. Insert the SmartPrep 065 (Standalone) diskette labeled Disk 1 into a diskette
drive.
2. Choose one of the following:
If...
You are using Windows
3.1 or later:
You are using Windows
95:
3. Enter the name of the drive designator, followed by setup. For example:
4.
Select
screens, you may select
Cancel
You may terminate the installation at any time by selecting
do so, you must start the program from the beginning to install SmartPrep
065.
5.
Select
options.
1-10
Then...
Select File from the Windows Program Manager.
Select Run from the File manu.
Select Start from the Status bar.
Select Run from the Start menu.
a:setup
; several informational screens are displayed. On any of these
OK
Exit
to return to the previous screen.
; a screen is displayed so that you may select installation
OK
to terminate the installation process or
SmartPrep
. If you
Exit
Sep 98