Micromeritics SmartPrep 065 Operator's Manual page 123

SmartPrep
190- (sample file) Error opening file (name): (error). Reports cannot be pro-
duced.
Cause:
Action:
191- (sample file) Error parsing reports from file (name). Reports cannot be
produced.
Cause A:
Action A: Check the space available on the hard disk.
Cause B:
Action B: Contact your service representative.
198- Print job (name) has been cancelled due to insufficient disk space. De-
lete unnecessary files and restart the report.
Cause:
Action:
199- Print job (name) has been cancelled.
Cause:
Action:
400- The communications port specified for the SmartPrep(s) is not physi-
cally installed in the Control Module. Cannot initialize.
Cause:
Action:
Aug 98
An error occurred while the program was opening a file neces-
sary to the report operation.
Use the name given in the error message to investigate. Contact
your service representative if you continue to receive this error
message.
The system was unable to create the usual temporary files dur-
ing the report, possibly due to insufficient disk space.
An internal processing error occurred.
The disk drive does not have enough space for the temporary
file required by the Windows Print Manager. Therefore, printing
of the requested report has been canceled.
Delete unnecessary files from the disk. At least five megabytes
of free space are required for normal operation.
The requested print job was canceled at your request.
None required.
The communications port associated with this unit was not valid.
Run the setup program and set up the unit on a valid port.
Error Messages
B-7