Micromeritics SmartPrep 065 Operator's Manual page 117

SmartPrep
Error messages for the SmartPrep 065 are listed numerically. If the Action re-
sponse instructs you to contact your service representative, record the error
message and make backup copies of any files involved in the operation.
30- Error accessing file (file name), error code = (number).
Cause A:
Action A: Clean the diskette drive. If this does not eliminate the problem,
Cause B:
Action B: Contact your service representative.
Cause C: A software error occurred when the file was accessed.
Action C: Contact your service representative.
Cause D: The name specified contains one or more invalid characters.
Action D: Enter a valid DOS filename (refer to your operating systems
31- Error writing file (file name), error code = (number).
Cause:
Action:
32- Invalid response from MMI 'FILE_READ' request.
Cause:
Action:
Aug 98
ERROR MESSAGES
Diskette may be damaged.
attempt operation using a backup copy of the file.
Hard disk may be damaged.
manual).
The hard disk does not have enough space left to perform the
operation.
Copy files not used regularly from the hard disk to diskette, de-
lete them from the hard disk, and then try the operation again.
An internal processing and/or hardware error has occurred.
Contact your service representative if you continue to receive
this error message.
Error Messages
B-1