Micromeritics SmartPrep 065 Operator's Manual page 120

Error Messages
107- File (file name) cannot be opened for writing. It is already in use.
Cause:
Action:
109- No '.INI' file present. Application will terminate.
Cause:
Action:
115- This field's entry is INVALID.
Cause:
Action:
116- An entry is REQUIRED for this field.
Cause:
Action:
117- Value is out of the valid range.
Cause:
Action:
118- Value is out of the valid range. Enter a value between (value) and
(value).
Cause:
Action:
B-4
The file you specified in a Save As operation is already open
for edit.
Select a different file for the Save As operation.
The ASCII file containing initialization information and system
options information used during program startup does not exist.
Run the SmartPrep 065 Setup program. (Refer to Configuring
Devices in Chapter 1.)
The highlighted field contains an invalid entry.
Check the entry and correct the error.
This field requires a valid entry for you to proceed.
Enter or select an appropriate value.
The value you entered in the highlighted field is outside the
valid range of values.
Check the entry and enter or select an appropriate value.
The value you entered in the highlighted field is outside the
valid range of values.
Check the entry and enter or select a value within the indicated
range.
SmartPrep
Aug 98