Installing The Touch Unit; When Installing The Touch Unit Outside The Whiteboard (Using The Touch Unit Bracket); Installation Procedure - Epson EB-1470Ui Installation Manual

Hide thumbs Also See for EB-1470Ui:

Table of Contents

Installation Guide

Installing the Touch Unit

Check that the following procedures have been completed before installing the Touch Unit.

• Installing the Projector ( s p.33)

• Adjusting the Position of the Projector ( s p.46)

• Calibrating the Interactive Pen ( s p.55)

The procedure differs depending on where the Touch Unit is to be installed.

• When installing the Touch Unit outside the whiteboard (using the Touch Unit Bracket) ( s p.65)

• When installing the Touch Unit on the whiteboard (without using the Touch Unit Bracket) ( s p.88)

Install the Touch Unit outside the whiteboard using the Touch Unit Bracket and connect it to the projector.

Check that the screen is parallel to the surface on which the Touch Unit is installed.

Caution

Only connect the projector to the EB-1470Ui. Do not connect it to any other Touch Units or devices.

Turn on the projector, and then press the [Menu] button

Using the Remote Control

Select Easy Interactive Function from Extended

Using the Control Panel

Table of Contents