Deflector Cable Adjustment
Shift Lever Adjustment
Shift Rod Adjustment
Controls: Service and Repairs
Make sure the QUICK STICK® is in the maximum rear position and centered;
ensure the deflector is in the full upward position. Draw the slack out of the
cable and secure the clamp.
g263051
The shift lever on the control panel is connected to the friction wheel in the
traction frame by a shift rod. Moving the shift lever changes the friction wheel
location.
g263052
1. Park the machine on a level surface. Stop the engine, wait for all moving
parts to stop and remove the key.
Figure 51
Figure 52
Page 6–14
POWER TRX™ HD Service Manual
3440-740 Rev A