Toro Power TRX Commercial 1428 Service Manual page 69

Auger Belt Removal (continued)
POWER TRX™ HD Service Manual
3440-740 Rev A
g263059
6. Remove the bolt securing the engine pulley to the crankshaft. If necessary,
hold the hub between the engine pulley and engine to keep the crankshaft
from turning. Remove the engine pulley and the auger belt from the
crankshaft.
g263060
7. Slide and remove the auger belt from the impeller pulley.
8. Tip the unit forward and secure. Remove the 4 (1/4–20 x 5/8 inch) screws
securing the bottom cover to the traction frame.
9. Remove the bottom cover. Depress the auger lever to allow brake to be
released.
10. Pull the belt out of the bottom of the machine.
Figure 58
Figure 59
Page 7–5 Belts: Service and Repairs