Toro Power TRX Commercial 1428 Service Manual page 55

QUICK STICK® Disassembly (continued)
POWER TRX™ HD Service Manual
3440-740 Rev A
g262305
2. Remove the 2 Phillips head screws on the RH of the QUICK STICK® globe
(the part that looks like a ball). Remove both halves and set aside.
g262306
3. Remove the (9/16 inch) locknut from the shoulder bolt. Slide the chute
control rod off and remove the friction washer.
4. Hold the QUICK STICK® so that the 5 screws holding the handle halves are
facing up. Remove the 5 Phillips head screws and lift off the top handle half.
Figure 39
Figure 40
Page 6–7 Controls: Service and Repairs