Traction Belt Removal (continued)
Traction Belt Installation
Belt Adjustment
Belts: Service and Repairs
5. Remove the traction belt from the crankshaft pulley.
6. Tip the unit forward and secure.
7. Remove the traction belt from the lower pulley.
g263062
1. Install the traction belt to the lower pulley.
2. Tip the unit upright.
3. Install the traction belt to the crankshaft pulley.
4. Install the impeller pulley.
5. Install the auger belt.
6. Refill the fuel.
Belt adjustments are made by adjusting the control cables. See the Controls
section for the procedure.
Figure 63
Auger Belt Installation (page 7–6)
Deflector Cable Adjustment (page 6–14)
Page 7–8
POWER TRX™ HD Service Manual
3440-740 Rev A