Auger And Traction Assemblies - Toro Power TRX Commercial 1428 Service Manual

Auger and Traction Assemblies

Separating the Auger and Traction Assemblies
Auger Gearbox: Service and Repairs
1. Park the machine on a level surface. Stop the engine, wait for all moving
parts to stop and remove the key.
2. Remove the 2 (1/4–20 x 5/8 inch) screws securing the belt cover to the
traction frame.
g335259
3. Remove the belt guide around the crankshaft pulley, avoid bending the guide.
g263059
4. Remove Phillips screw on the face gear cover. Remove the face gear cover.
5. Disconnect the chute control cable.
6. Disconnect the deflector cable from the deflector.
Figure 68
Figure 69
Page 9–4 POWER TRX™ HD Service Manual
3440-740 Rev A