Control Interlock Removal (continued)
POWER TRX™ HD Service Manual
3440-740 Rev A
g263047
4. To remove the lockout rod, go to the RH end. There are 2 roll pins on the
LH side and 1 in the lockout cam on the RH side.
g263046
5. Once the roll pins are driven out, the lockout rod can be moved to the side
and removed. The lockout link can now be removed from the lockout rod.
6. Remove the levers.
Note: Steps 1 and 2 above, do not need to be done in that order. It's possible
to remove the rod without removing the shoulder bolt.
Figure 46
Figure 47
Page 6–11
Controls: Service and Repairs