Operating The Attachment Lift Lever - Toro 79366 Operator's Manual

Operating the Attachment Lift
Lever
The attachment lift lever (Fig. 34 & 35) is used to
raise and lower various attachments.
Raising Attachments
1. Start the tractor.
2. Pull the attachment lift lever upward until the
latch locks. In this position, the lift will hold the
attachment in the up, or raised position.
POTENTIAL HAZARD
When the engine is off, attachments in the
raised position can gradually lower.
WHAT CAN HAPPEN
Someone nearby may be pinned or injured
by the attachment as it lowers.
HOW TO AVOID THE HAZARD
Always lower the attachment lift each time
you shut off the tractor.
IMPORTANT: The tractor hood must be
closed before the snowthrower is raised.
Lowering Attachments
1. Start the tractor.
2. Push the attachment lift lever downward to
lower the attachment.
Figure 34
1. Attachment lift lever
Figure 35
1. Raise attachment
Operation
1
m–3258
1
2
m–3315
2. Lower attachment
17