QUICK STICK® Replacement
QUICK STICK
®
Removal
POWER TRX™ HD Service Manual
3440-740 Rev A
1. Park the machine on a level surface. Stop the engine, wait for all moving
parts to stop and remove the key.
2. Unhook the Z-bend and disconnect the deflector cable from the underside of
the QUICK STICK®.
g262301
3. On the underside of the control panel, remove the 2 (1/4–10 x 0.82 inch)
screws holding the QUICK STICK® cover in place.
g262302
4. Lift the front cover and pull forward to release the latch tabs on the rear.
Set the cover aside.
Figure 35
Figure 36
Page 6–5
Controls: Service and Repairs