Toro Power TRX Commercial 1428 Service Manual page 28

Engine Replacement
Engine Removal
Engine Installation
Engine: Service and Repairs
1. Park the machine on a level surface. Stop the engine, wait for all moving
parts to stop and remove the key.
2. Remove the traction belt.
3. Remove the 2 (1/4–20 x 1 inch) bolts securing the QUICK STICK® rod.
Remove the QUICK STICK® rod.
4. Remove the 2 (15 mm) nuts securing the LH engine to the LH engine plate.
Repeat on the RH side of the machine.
g263346
5. Using a proper lifting device, lift the engine away from the machine.
1. Using a proper lifting device, place the engine into position on the machine.
2. Apply loctite and install the 2 (15 mm) nuts securing the LH engine to the LH
engine plate. Torque the nuts to 12.25 ± 1.7 N • m (150 ± 15 in-lb). Repeat
on the RH side of the machine.
Traction Belt Removal (page 7–7)
Figure 4
Page 4–4 POWER TRX™ HD Service Manual
3440-740 Rev A