Deflector Cable Removal (continued)
Deflector Cable Installation
POWER TRX™ HD Service Manual
3440-740 Rev A
g263044
3. Remove the cable clamp and disconnect the cable end from the deflector.
g263050
4. Remove the cable clamp on the traction housing.
1. Connect the cable end to the deflector. Secure with a cable clamp.
2. Connect the Z-bend end to the machine.
3. Install the cable onto the bracket. Secure with tabs.
4. Connect the cable clamp to the traction housing.
Figure 49
Figure 50
Page 6–13
Controls: Service and Repairs