Shutting Off The Engine; Operating The Handwarmers; Operating The Auger-Height Lever - Toro Power TRX Commercial 1428 OHXE Operator's Manual

Shutting Off the Engine

Operating the
Handwarmers
Operate the handwarmers as follows:
•
Press the switch to the O
handwarmers.
•
Press the switch to the O
handwarmers.
Figure 14
1. On/Off switch
2. O position
N
position to turn on the
N
position to turn off the
FF
g026460
3. O position
FF
Figure 13
Operating the Auger-Height
Lever
Use the auger-height lever to adjust the height of the
auger housing.
Press the auger-height lever down while moving the
handles up or down as needed to obtain the desired
auger height position.
Release the lever to lock the auger in the desired
height position.
1. Auger-height lever
11
Figure 15
g252411
g313864