Toro Power TRX Commercial 1428 Service Manual page 54

QUICK STICK ® Removal (continued)
QUICK STICK® Disassembly
Controls: Service and Repairs
g262303
5. Remove the 3 (1/4–20 x 1 inch) carriage bolts and nuts on the chute control
rod and lift the QUICK STICK® out of the control panel.
Note: Notice the location of the cable clamp for latch cable function.
6. Remove the top cover.
7. Disconnect the chute cable.
g262304
1. Remove the Phillips head screw retaining the blue lever cap.
Figure 37
Figure 38
Page 6–6 POWER TRX™ HD Service Manual
3440-740 Rev A