Toro Power TRX Commercial 1428 Service Manual page 68

Auger Belt Replacement
Auger Belt Removal
Belts: Service and Repairs
1. Park the machine on a level surface. Stop the engine, wait for all moving
parts to stop and remove the key.
2. Drain the fuel into a suitable container.
3. Disconnect the light from the cover.
g335258
4. Remove the 2 (1/4–20 x 5/8 inch) screws securing the belt cover to the
traction frame. Remove the belt cover.
g335259
5. Remove the 2 (M8 x 1.25 x 20) screws securing the belt guide to the engine.
Remove the belt guide.
Note: Avoid bending the belt guide.
Figure 56
Figure 57
Page 7–4 POWER TRX™ HD Service Manual
3440-740 Rev A