Chapter 4: Engine - Toro Power TRX Commercial 1428 Service Manual

Engine Installation (continued)
POWER TRX™ HD Service Manual
3440-740 Rev A
g263346
3. Install the QUICK STICK® rod into the gear face on the chute post. Secure
with 2 (1/4–20 x 1 inch) bolts.
When installing the traction belt, make sure the belt is riding on top
of the traction pulley sheaves to ensure the belt does not break.
4. Install the traction belt.
Figure 5
CAUTION
Traction Belt Installation (page 7–8)
Page 4–5 Engine: Service and Repairs