Removing The Boss S2 Module - Dell EMC XC Core XC750xa Installation And Service Manual

Figure 109. Removing the BOSS S2 module blank
Next steps
1. Replace the BOSS S2 module blank or install the BOSS S2 module.

Removing the BOSS S2 module

Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in the Before working inside your system.
Steps
1. Pull and lift the BOSS S2 card carrier retention latch lock to open.
2. Slide the BOSS S2 card carrier out.
100 Installing and removing system components