Boss S2 Module; Removing The Boss S2 Module - Dell EMC XC Core XC650 Installation And Service Manual

Figure 72. Installing the intrusion switch module
Next steps
1. Install the expansion card
2. Follow the procedure listed in

BOSS S2 module

Removing the BOSS S2 module

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
Steps
1. Lift the retention latch to release the BOSS S2 card carrier.
2. Slide the BOSS S2 card carrier out from the BOSS S2 module.
86 Installing and removing system components
riser.
After working inside your
Safety instructions.
Before working inside your
system.
system.