Removing A Nvme Connector Blank; Installing A Nvme Connector Blank - Dell EMC XC Core XC750xa Installation And Service Manual

Removing a NVMe connector blank

Prerequisites
1. Follow the safety guidelines listed in the
2. If installed, remove the front
3. Remove all drives.
4. Remove the drive backplane
5. Remove the drive backplane
CAUTION: NVMe connector blank is applicable for the system with x6 NVMe drive configuration.
NOTE: NVMe connector blank must be removed from the drive backplane in order to change x6 NVMe drive configuration
to other storage configuration.
Steps
Press the release tab, and remove the NVMe connector blank from the drive backplane.
Figure 48. Removing a NVMe connector blank
Next steps
1. Replace the NVMe drive blank.

Installing a NVMe connector blank

Prerequisites
1. Follow the safety guidelines listed in the
2. Remove all drives.
3. Remove the drive backplane
4. If required, remove the drive backplane
CAUTION: NVMe connector blank is applicable for the system with x6 NVMe drive configuration.
Steps
1. Align the NVMe connector blank with the guiding hole on the drive backplane.
2. Press the NVMe connector blank until clicks into place.
52 Installing and removing system components
Safety instructions.
bezel.
cover.
Safety instructions.
cover.