Figure 44. Installing the rear mounting front PERC module
Next steps
1. Connect all the cables to rear mounting front PERC module.
NOTE:
Route the cable properly to prevent the cable from being pinched or crimped.
2.
Replace the drive backplane
3. Follow the procedure listed in
Drive backplane
Drive backplane
Depending on your system configuration, the drive backplane supported is listed here:
Table 13. Supported backplane options
System
XC Core XC750xa
Figure 45. 8 x 2.5-inch universal drive backplane
1. BP_PWR_CTRL
cover.
After working inside your
system.
Supported hard drives options
2.5-inch (x 8) Universal backplane
2. BP_DST_SA1 (PERC to backplane)
Installing and removing system components
49