Table of Contents
Advertisement
7
Press
for one second or longer
The tone frequency will be set and the display will return to the previous screen.
The display can also be returned to the previous screen by touching [BACK] twice.
Tip
Using the tone squelch
1
Press
The function menu will be displayed.
2
Touch [SQL] to display "T-TRX"
• When [SQL] is not displayed in the menu, use [BACK]
Tips
or [FWD] to change the menu.
• The squelch type changes in the following sequence
each time it is touched.
"NOISE" "T-TX" "T-TRX" "T-REV" "D-TRX" "PRGM"
"PAGER" "D-TX"* "TT/DR"* "DT/TR"*
* These squelch types will be displayed when
[SIGNALING] → [8 SQL EXPANSION] is set to "ON"
in the set-up menu.
The squelch will open only when receiving a tone
signal of the set frequency.
Tip
A bell can be rung (beep) when signals containing the same tone code are received (
Transmitting the tone signal
1
Press
The function menu will be displayed.
2
Touch [SQL] to display "T-TX"
Communicating with Specified Partner Stations
P.114).
107
Advertisement
Table of Contents
