Starting APRS Operation
Setting the squelch detection condition
This sets the squelch detection condition during APRS (internal modem) operation.
1
Press
for one second or longer
The set-up menu will be displayed.
2
Select and touch [DATA]
The menu list will be displayed.
3
Touch [4 DATA SQUELCH]
The screen for the detailed settings will be
displayed.
4
Touch [APRS] to select the squelch detection
condition during APRS operation using the internal
modem
The squelch detection condition switches between
"RX BAND" and "TX/RX BAND" each time it is
touched.
"RX BAND": Transmission is not possible when the
squelch of the reception band is open.
"TX/RX BAND": Transmission is not possible when the squelch of either the receive
Tip
Factory default value: RX BAND
5
Press
for one second or longer
The squelch target will be set and the display will return to the previous screen.
band or the transmit band is open.
16