Table of Contents
Advertisement
Installation Manual
H3C VG 31-08 Voice Gateway
3.2 Installing the VG 31-08
You can install your device in a standard 19-inch rack or on a
workbench/tabletop.
3.2.1 Tabletop/Workbench Mounting
Place the VG 31-08 on a clean and flat workbench/tabletop. To
prevent any damage, observe the following:
Ensure the workbench/tabletop is stable enough.
Allow 10 cm (3.9 in.) of clearance around the VG 31-08.
Do not stack the VG 31-08 on any other equipment.
3.2.2 Rack Mounting
The VG 80-20 is designed with the following dimensions to be
mounted in a standard 19-inch rack:
H × W × D = 42 × 360 × 436 mm (1.7 × 14.2 × 17.2 in.) (without
feet)
Follow these steps to install the VG 80-20 (see Figure 3-2):
Step 1: Ensure that the rack is stable enough and properly
grounded. Attach the rack-mount brackets to the front or rear of the
chassis with screws.
Step 2: Place the VG 31-08 on a shelf in the rack and slide it to a
proper position along the guide rails.
Step 3: Fix the rack-mount brackets to the rack posts with suitable
antirust pan-head screws. Make sure that the device is in level
position and securely fixed.
Chapter 3 Installing the VG 31-08
3-2
Advertisement
Table of Contents
