Table of Contents
Advertisement
3. To Program Sequence Test #3
Press
right arrow key and to program a test number for step 3 of the sequence.
Press
up/down arrow keys to select the third test in the sequence as none, ship, 1 –25 or
calc (see discussion of the calculate function, step 4 below).
Press
right arrow key to exit the program mode and display the complete sequence for
sequence test number 1. "Program" message now indicates "Idle" and the three tests which
were programmed to make up the sequence are now indicated.
Page 48 of 48
S1: 3
Program
Tests: none
S1: 3
Program
Tests: none
S1: 3
Program
Tests: skip
S1: 3
Program
Tests: calc
S1: 3
Program
Tests: 3
S1
Tests: 1`: 2: 3
Idle
Operation/Programming
Advertisement
Table of Contents
