QuadTech Guardian 2500 Series Instruction Manual page 15

2000-40 and 2000-42 Interfaces
IEEE-488
2000-40
IEEE-488 Interface Option
(Rear Panel Configuration)
2000-43 2TΩ Enhanced Option
The 2000-43 is an option for use with the Guardian 2530 only. This option provides enhanced
measurement capability of devices with high resistance and substantial parallel capacitance
(devices such as wire wound heaters, ac inlet filters, sensors, etc.). When this option is installed
additional ramp and dwell time will be required in DC Hipot and fall/discharge time will be
increased for DC test voltages greater than 3000 V. AC Hipot functions are not effected by this
option. This option generally serves no purpose if insulation resistance measurements are<200
MΩ.
Accessories (continued)
RS232
REMOTE I/O
ENHANCED
REMOTE I/O
RS232
2000-42
Enhanced Remote Interface
(Rear Panel Configuration)
Page 15 of 15