Enhanced Features; Test Low Limit - QuadTech Guardian 2500 Series Instruction Manual

2.4.9 Enhanced Features

The Guardian 2500 allows operator selection of enhanced features. The available enhanced
features include:

Test Low Limit

Delay Time
Continue Voltage On Fail
Continue Steps On Fail
Stop Test On Pass
Step And Increment
Press the UTILITY key and
Press up/down arrow keys to select the display of these features On or Off, as
programmed. Selecting Off only prevents the enhanced features from being displayed on
the Utility menu. It does not change the operation of any of these enhanced features.
1. Test Low Limit
This selection determines when the low limit is checked. If Continuous is selected the low limit
is checked throughout the complete measurement time, including ramp time. If End of Test is
selected the low limit is checked only at the end of the measurement time.
Press the UTILITY key and
If Enhanced Features is set for On, press
If Enhanced Features is set for Off, press
right arrow key to select Test Low Limit.
Press up/down arrow keys to select Test Low Limit for Continuous or End of Test.
Page 56 of 56
right arrow key to select Enhanced Features.
Enhanced Features
On
Enhanced Features
Off
right arrow key to select Enhanced Features
Clear All Tests
Tests To View
Perform Calibration
Ground Fault Stop
Arc Pulse Width
Adaptive DC Ramp
Autoranging
Util
Util
right arrow key to select Test Low Limit.
up/down arrow key to select On and press
Operation/Programming