3.5
IEEE-488.2 Interface
3.5.1 General
An IEEE-488 interface is available as an option to the Guardian 2500 Series, through a
connector (24 pin) on the rear panel. This interface can be used to connect to a system
containing a number of instruments and a controller in which each meets IEEE Standard
488.2 (Standard Digital Interface for Programmable Instrumentation) Refer to Table 3-3
below for a full tabulation of connections and Table 3-4 for the command set.
The following functions have been implemented. Refer to the standard for an
explanation of the function subsets, represented by the identifications below.
SH1
Source Handshake
AH1
Acceptor Handshake
T5
Talker
L3
Listener
SR1
Service Request
RL1
Remote Local
Page 78 of 78
PP1
Parallel Poll
DC1
Device Clear
DT1
Device Trigger
C0
Controller
E2
Electrical Interface
Interface