QuadTech Guardian 2500 Series Instruction Manual page 22

Condensed Operating Instructions (continued)
Press PROGRAM key
to enter program mode
Press arrow to
change the first
parameter (changed to
AC Real Current)
Press arrow to
program next parameter
Press arrow to
change the first
parameter (changed to
1.000KV)
Press arrow to
continue programming
parameters and
to make changes
3. Return the display to Idle mode (upper right) and the test # desired (upper left) before
proceeding.
Page 22 of 22
1 AC:0.500KV
Hi:15.00mA
1
Mode: AC Total Current
1
Mode: AC Real Current
1
Volt: 0.500KV
1
Volt: 1.000KV
1
??????????
arrows
Display returns to Idle mode after programming the last parameter.
or
Press arrow to reverse the selection of parameters
or
Exit Program mode at any time by (with changes made) by pressing
PROGRAM key
Program
7.0sec
Program
Program
Program
Program
Program