QuadTech Guardian 2500 Series Instruction Manual page 33

Fig 1-1
Ref. # Item
13 REMOTE
Indicator
GFI ACTIVE When illuminated (green) indicates that the instrument has been enabled
Indicator
14 HIGH
VOLTAGE a warning to the operator that high voltage is present to the High Voltage
Indicator
15 GROUND
CONTINUITY Return (accepts the small white clip lead cable with banana plug)
Connector
16 RETURN
Connector
17 HIGH
VOLTAGE
Connector
Introduction
Table 1-1 (continued)
Front Panel Controls and Indicators
Function
When illuminated indicates that the instrument has been enabled for
remote operation. (Illuminates green on late model instruments)
for Ground Fault Stop. (Indicator not present on some earlier units)
When indicator is flashing (or constantly lit on some later units) serves as
Output connector.
Continuity test connection, measured between this connector and the
Standard banana plug.
Ground return for High voltage output (accepts the black clip lead cable
with BNC connector). Selectable for ground or virtual ground.
BNC female
High voltage output for AC/DC hipot & insulation
resistance measurements, jack recessed for safety purposes (accepts the
large white clip lead cable with high voltage connector).
Amp Part # 861610-2
Page 33 of 33