How To Start The System; How To Set The Kind Of Display - HP 81200 User Manual

How to Start the System

Structure of the User Interface
How to Start the System
At a preconfigured HP 81200 system, the Windows NT automatic log-in
script is enabled. After power on, you are automatically registered as user
DVT and the Windows desktop appears.
The display driver is set to a mode that supports both, VGA monitor and
the HP 81200 flat panel option 001. What you see is the upper left-hand
corner of an 800 x 600 pixel display in enlarged mode (640 x 480 pixels).
The visible area can be moved with the mouse.
Once the Windows desktop is displayed, you need to inform the operating
system about your display.
N O TE
This should always be the first step after power on. Problems can arise, if
you operate Windows or the HP 81200 software without specifying your
display.

How to Set the Kind of Display

To specify the connected type of display:
1 Move the cursor downwards until the Windows task bar appears.
2 Open the Windows START menu.
3 Select Settings and click Control Panel.
This opens the Windows Control Panel.
59
HP 81200 Data Generator/Analyzer Platform User Guide, Revision 2.1