How to Add, Move or Delete Blocks
HP 81200 Data Generator/Analyzer Platform User Guide, Revision 2.1
How to Add, Move or Delete
Blocks
A sequence usually consists of more than one block. You may wish to add
blocks, delete blocks, and move blocks.
To manipulate the overall sequence:
1 Open the context menu of a block (right-click into the block area).
Figure 63
Block Menu
2 Choose the desired action:
– Add Block Before: Inserts a new default block with default segments
before the current block.
– Add Block After: Inserts a new default block with default segments
below the current block.
– Copy Block: Copies the chosen block to the clipboard.
– Cut Block: Copies the chosen block to the clipboard and removes it
from the sequence.
– Paste Block Before: Available, after a block has been copied or cut.
Inserts the block from the clipboard above the current block.
– Paste Block After: Available, after a block has been copied or cut.
Inserts the block from the clipboard below the current block.
Creating the Stream of Generated and Expected Data
137