HP 81200 User Manual page 78

Structure of the User Interface
78
Additional options are available if the Segment Editor has been started
from the Sequence Editor for editing or creating a segment within a block:
• Trace View: Shows trace numbers
• Port View: Shows the data port to which the segment is assigned
• Terminal View: Shows the specified terminals of the data port
• Connector View: Shows the identifications of the connected channels
Result Display
Enables you to choose a suitable display. Available options depend on the
kind of test that has been specified in the Measurement Configuration
window:
• Bit Error Rate—only available, if "Error Rate Measurement" has been
selected. Opens the Bit Error Rate display window.
Shortcut: Bit Error Rate Display icon in the tool bar.
• Compared Data—only available, if "Compare and Capture" or "Compare
and Acquire around Error" has been selected. Opens the Error State
display window.
Shortcut: Error State Display icon in the tool bar.
• Captured Data—not available, if "Error Rate Measurement" has been
selected. Opens the Error State display window.
Shortcut: Error State Display icon in the tool bar.
• Errored Data—only available, if "Compare and Capture" or "Compare
and Acquire around Error" has been selected. Opens the Error State
display window.
Shortcut: Error State Display icon in the tool bar.
• Waveform—not available, if "Error Rate Measurement" has been
selected. Opens the Waveform Viewer.
Shortcut: Waveform Viewer icon in the tool bar.
Zoom
An option of the Waveform Viewer.
Enables you to zoom into or out of the display.
Signals
An option of the Waveform Viewer.
Enables you to change the waveform amplitudes and to rearrange the
display.
HP 81200 Data Generator/Analyzer Platform User Guide, Revision 2.1
Items of the Main Menu