Installing A High-Performance Fan - HP HPE ProLiant DL365 Gen10 Plus Server User Manual

Installing a high-performance fan

Installing a high-performance fan
Certain hardware configurations require high-performance fans. To verify a specific configration, see the product QuickSpecs on the
Hewlett Packard Enterprise website website.
This kit meets extended ambient operating temperatures above 35 degrees Celsius. For more information about extended ambient
configurations, see the Hewlett Packard Enterprise Hewlett Packard Enterprise website
Prerequisites Prerequisites
Before installing this option, be sure you have the following:
The components included with the hardware option kit
Procedure Procedure
1. Observe the following alert:
IMPORTANT: After removing a high-performance (dual-rotor) fan, install or replace the fan within 60 seconds. IMPORTANT:
Otherwise, the server will shut down gracefully.
2. Power down the server (Power down the server).
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Do one of the following:
a. Extend the server from the rack ( Extend the server from the rack ).
b. Remove the server from the rack ( Remove the server from the rack ).
5. Remove the access panel ( Remove the access panel ).
6. Remove all standard fans from the fan bays.
7. Remove fan blanks from the fan bays, if installed.
website.
Installing a high-performance fan 72