Systems Insight Display Combined Led Descriptions - HP HPE ProLiant DL365 Gen10 Plus Server User Manual

Systems Insight Display combined LED descriptions

Systems Insight Display combined LED descriptions
The combined illumination of the following LEDs indicates a system condition:
Systems Insight Display LEDs
System power LED
Health LED
Systems Insight Display Systems Insight Display
LED and color LED and color
Processor (amber)
Processor (amber)
DIMM (amber)
DIMM (amber)
Over temp (amber)
Over temp (amber)
PCI riser (amber)
Fan (amber)
Fan (amber)
Power supply (amber)
Power supply (amber)
Power cap (off)
Health Health System System Status Status
LED LED power LED power LED
Red Amber One or more of the following
conditions might exist:
Amber Green Processor in socket X is in a pre-
failure condition.
Red Green One or more DIMMs have failed.
Amber Green DIMM in slot X is in a pre-failure
condition.
Amber Green The Health Driver has detected a
cautionary temperature level.
Red Amber The server has detected a hardware
critical temperature level.
Red Green The PCI riser cage is not seated
properly.
Amber Green One fan has failed or has been
removed.
Red Green Two or more fans have failed or
been removed.
Red Amber One or more of the following
conditions might exist:
Amber Green One or more of the following
conditions might exist:
— Amber Standby.
Processor in socket X has failed.
Processor X is not installed in
the socket.
Processor X is unsupported.
ROM detects a failed processor
during POST.
Only one power supply is
installed and that power supply
is in standby.
Power supply fault.
System board fault.
Redundant power supply is
installed and only one power
supply is functional.
AC power cord is not plugged
into redundant power supply.
Redundant power supply fault.
Power supply mismatch at
POST or power supply
mismatch through hot-plug
addition.
Systems Insight Display combined LED descriptions 13