HP HPE ProLiant DL365 Gen10 Plus Server User Manual page 4

3.4 Identifying the contents of the server shipping carton
3.5 Installing hardware options
3.6 Installing the server into the rack
3.7 Operating system
3.7.1 Installing the operating system with Intelligent Provisioning
3.8 Selecting boot options in UEFI Boot Mode
3.9 Selecting boot options
3.10 Registering the server
4 Hardware options installation
4.1 Hewlett Packard Enterprise product QuickSpecs
4.2 Introduction
4.3 Installing a redundant hot-plug power supply
4.4 Memory options
4.4.1 DIMM population information
4.4.2 DIMM-processor compatibility
4.4.3 HPE SmartMemory speed information
4.4.4 Installing a DIMM
4.5 Installing a high-performance fan
4.6 Drive options
4.6.1 Hot-plug drive guidelines
4.6.2 Installing a hot-plug SAS, SATA or NVMe drive
4.6.3 Installing an 8 SFF optical drive
4.7 Universal media bay options
4.7.1 Installing a 2 SFF SAS/SATA drive cage
4.7.2 Installing a 2 SFF NVMe drive cage option
4.7.3 Installing an 8 SFF display port/USB/optical blank option
4.8 Primary PCI riser cage options
4.8.1 Installing an optional primary PCI riser board
4.8.2 Installing the SATA M.2 2280 riser option
4.8.3 Installing an expansion board in the primary riser cage
4.8.4 Installing an accelerator or GPU in the primary riser cage
4.9 Secondary PCI riser options
4.9.1 Installing a secondary full-height PCI riser cage option
4.9.2 Installing a secondary low-profile PCIe slot riser cage option
4.9.3 Installing an expansion board in the secondary riser cage
4.9.4 Installing an accelerator or GPU in the secondary riser cage
4.10 Smart Array controller options
4.10.1 Installing an HPE Smart Array P408i-a SR Gen10 Controller option
4.10.2 Installing an HPE Smart Array P408i-p SR Gen10 Controller option
4.10.3 Installing an HPE Smart Array P816i-a SR Gen10 Controller option
4.11 Processor and heatsink options
4.11.1 Processor and socket components
4.11.2 Installing a processor
4.11.3 Installing a heatsink