Selecting boot options
Selecting boot options
This server supports both Legacy BIOS Boot Mode and UEFI Boot Mode. On servers operating in UEFI Boot Mode, the boot controller
and boot order are set automatically.
Procedure
Procedure
1. Press the Power On/Standby button.
2. Do one of the following:
To enter the UEFI System Utilities screen and modify the server configuration ROM default settings, press the F9 F9 key on the
ProLiant POST screen. Choose one of the following boot modes:
Legacy BIOS
UEFI (default)
If you do not need to modify the server configuration and are ready to install the system software, press the F10
Intelligent Provisioning.
For more information on automatic configuration, see the UEFI documentation on the Hewlett Packard Enterprise website
Hewlett Packard Enterprise website .
Selecting boot options
F10 key to access
60