Installing The Upper Cover; Closing The Fan Cover - Fujitsu Oracle M10-1 Service Manual

6.1.3

Installing the upper cover

If the maintenance was performed on an internal FRU in the chassis, install the upper
cover.
Install the upper cover by sliding it toward the front of the chassis.
1.
Note - Check that the pins on the rear of the chassis (four positions) are inserted into the
upper cover.
Figure 6-5 Installing the upper cover
6.1.4

Closing the fan cover

If the maintenance was performed on an internal FRU in the chassis, install the upper
cover, and then close the fan cover.
Hold the edge of the fan cover, and close it while pressing the green slide
1.
button toward the inside of the chassis.
Note - Check that the fan cover is firmly closed and secured.
Chapter 6 Understanding the Preparations for Restoring the System 71