Table of Contents
Advertisement
Installing the cover
Position the top cover from above in the direction of the arrow (1) on the casing base so that the
distance (a) from the rear casing edge is approximately 10 mm.
Push the top cover in the direction of the arrow (2) until it engages.
a
a
Lock the casing by pushing back the locking slide (1) in the direction of the arrow past a slight
resistance until it engages. The locking slide is situated on the rear of the casing.
Lock the casing again if necessary.
Return the PC of its original position.
Reconnect the cables.
36
2
1
1
Advertisement
Table of Contents
