initialization completed successfully.
Log in to the XSCF via the serial port.
8.
Set the XSCF time.
9.
For details on the procedure, see
10. Confirm that the XSCF restarts, and then connect the XSCF LAN cable.
Note - Reinstall the cables in their original positions by referring to the notes that you made
before the start of maintenance.
11. Match the XCP firmware version with the pre-replacement version.
For details on the procedure, see
The FRU installation work is completed. See
continue maintenance work.
"6.3.1 Setting the
"6.3.2 Confirming the firmware
"Chapter 7 Maintenance
Chapter 16 Maintaining the Motherboard Unit/Memory
time."
version."
Flow" to
211