Fujitsu Oracle M10-1 Service Manual page 31

Location
number
1
2
The mode switch sets the operation mode for the system. The Locked and Service
operation modes can be switched by sliding the mode switch.
Table 2-3
Table 2-3 Functions of the mode switch
Icon
Use the power switch to start or stop the system. The system starts/stops differently
depending on how the power switch is pressed.
Table 2-4
switch is pressed.
Table 2-4 Functions of the power switch
Icon Operation
Brief press
(For 1 second or
more and less than 4
seconds)
Long press
(For 4 seconds or
more)
Switch
Mode switch
Power switch
describes the difference between the modes.
Name Description
Locked mode Mode used for normal operation
- The power switch can be used to start the system but not to
stop it.
Service mode Mode used for maintenance
- The power switch cannot be used to start the system but can be
used to stop it.
- Place the system in Service mode to perform maintenance
work with the system stopped.
describes how system starts/stops vary depending on how the power
Description
If the system has been
started in Service mode:
If the system is stopped in
Service mode:
If the system has been
started in Locked mode:
If the system is stopped in
Locked mode:
If the system has been
started in Service mode:
If the system startup
process is in progress in
Service mode:
Operation is ignored.
Operation is ignored.
Operation is ignored.
Starts the system.
At this time, if a wait time for the air conditioning
facilities or a warm-up time is set on the XSCF,
the processing for waiting for the power-on of the
air conditioning facilities and the completion of
warm-up is omitted.
Perform the system shutdown process to stop the
system.
Cancels the system startup process and stops the
system.
Chapter 2 Understanding the System Components 17