10.3.1
Accessing the HDD backplane
Pull the chassis out of the rack.
1.
For details, see
2.
Remove all the internal disks or filler units mounted in the chassis.
For details, see
Note - Make a note of the locations of the internal disks before removing them to ensure that
they are reinstalled correctly.
3.
Open the fan cover.
For details, see
4.
Remove the upper cover.
For details, see
10.3.2
Removing the HDD backplane
Disconnect the three cables connected to the HDD backplane.
1.
Note - Record the positions of the cables before removing them to ensure that they are
reinstalled correctly.
Figure 10-2 HDD backplane cables
2.
Release the cable guide lock.
For details, see
"5.8.3 Pulling the chassis out from the
"9.3 Removing an Internal
"5.8.4 Opening the fan
"5.8.5 Removing the upper
"5.8.7 Releasing the cable guide
Chapter 10 Maintaining the HDD Backplane
rack."
Disk."
cover."
cover."
lock."
137