Figure 5-2 Removing the power cords
5.8.2
Removing the cables
When maintaining a PCIe card
■
Disconnect all the cables connected to the PCIe card requiring maintenance.
When maintaining a motherboard unit, memory, or PSU backplane
■
Remove all the cables connected to the external interface on the rear of the device.
Note - Record the positions of the cables before removing them to ensure that they are
reinstalled correctly.
5.8.3
Pulling the chassis out from the rack
To perform maintenance on an internal FRU in a chassis, pull the chassis out of the
rack.
Caution - If the rack is supplied with a quakeresistant options kit, install it. The
quakeresistant options kit will prevent the rack from falling over when pulling the
chassis out along the slide rail when performing maintenance.
60
Fujitsu M10-1/SPARC M10-1 Service Manual ・ June 2021