Confirming The Fru Information And Resource Information - Fujitsu Oracle M10-1 Service Manual

XSCF> ioxadm list
PCIBOX
PCIBOX#2007
PCIBOX#2006
PCIBOX#2005
PCIBOX#2004
*1 Mounting locations of the PCI expansion unit and link card
3. Execute the ioxadm command to check the firmware version information for
the PCI expansion unit and link card.
XSCF> ioxadm -v list
Location
State
PCIBOX#2007
On
PCIBOX#2007/PSU#0
On
PCIBOX#2007/PSU#1
On
PCIBOX#2007/IOB
On (*1)
PCIBOX#2007/LINKBD BOARD
On
PCIBOX#2007/FANBP
On
BB#00-PCI#07
On (*2)
*1 Firmware version on the I/O board
*2 Firmware version on the link card
4.1.3 Confirming the FRU information and resource
information
Use XSCF shell commands to check the FRU information and resource information.
Table 4-2
information. For details on each command, see the Fujitsu SPARC M12 and Fujitsu
M10/SPARC M10 XSCF Reference Manual for the XCP firmware version being used.
Type FW Ver Serial Num
PCIBOX - PZ21242007
PSU - FEJD1212000530
PSU - FEJD1212000529
IOBOARD 1330 PP123300E5
- PP141900V0
FANBP - PP123203NT
CARD 1330 PP133200UF
lists the commands used for checking the FRU information and resource
Link
BB#00-PCI#7 (*1)
BB#00-PCI#5
BB#00-PCI#3
BB#00-PCI#1
Part Num
CA01022-0750-D/
CA01022-0750-D/
CA20365-B66X 008AG
CA20365-B60X 008AD/7061035
CA20365-B68X 004AC
CA20365-B59X 008AD/7061040
Chapter 4 Preparation and Precautions for Maintenance 33