Fujitsu Oracle M10-1 Service Manual page 5

5.6.1 Saving XSCF setting information 54
5.6.2 Setting recovery mode 54
5.6.3 Saving the logical domain configuration information and
OpenBoot PROM environment variables 55
5.7 Releasing a FRU from the System with the replacefru Command 57
5.8 Accessing a FRU 58
5.8.1 Removing the power cords 58
5.8.2 Removing the cables 60
5.8.3 Pulling the chassis out from the rack 60
5.8.4 Opening the fan cover 61
5.8.5 Removing the upper cover 63
5.8.6 Removing the air duct and PSU backplane cover 63
5.8.7 Releasing the cable guide lock 65
Chapter 6 Understanding the Preparations for Restoring the System 67
6.1 Restoring the Chassis 67
6.1.1 Locking the cable guide 67
6.1.2 Installing the air duct and PSU backplane cover 69
6.1.3 Installing the upper cover 71
6.1.4 Closing the fan cover 71
6.1.5 Putting the chassis into the rack 73
6.1.6 Installing the power cords 74
6.2 Incorporating a FRU into the System with the replacefru Command
77
6.3 After Replacing the Motherboard Unit/PSU Backplane 78
6.3.1 Setting the time 79
6.3.2 Confirming the firmware version 79
6.3.3 When the system is configured with a hardware RAID 80
6.4 Diagnosing a Replacement FRU 80
6.5 Restoring Setting Information and Configuration Information 82
6.5.1 Restoring XSCF setting information 82
Contents v