Fujitsu Oracle M10-1 Service Manual page 128

Figure 7-12 System-stopped/hot removal flow (for an internal disk)
1. Opening the rack door
2. Switching the mode switch on the operation
panel to Service mode
3. Checking the operating condition of the
system and the I/O device usage status
4. Stopping the system
5. Removing an internal disk
6. Diagnosing the chassis requiring maintenance
7. Confirming that there is no problem with the
chassis after the removal
8. Returning the mode switch on the operation
panel to Locked mode
9. Starting the system
10. Closing the rack door
114 Fujitsu M10-1/SPARC M10-1 Service Manual ･ June 2021
Removal complete