Step 4: Connect The Monitor; Step 5: Connect The Power Adapter And Power On The Dvr; Step 6: Creating A New, Secure Password - FLIR M6100 Series Instruction Manual

5 Basic Setup (M6100 Series)

5.4 Step 4: Connect the Monitor

• Connect the included HDMI cable from the HDMI port to the TV or monitor
(recommended).
OR
• Connect a VGA cable (not included) from the VGA port to the monitor.
1. HDMI port.
2. VGA port.

5.5 Step 5: Connect the Power Adapter and Power on the DVR

1. Connect the included power adapter to the DC 12V port. Connect the end of the power
adapter to a wall socket or a surge protector.
2. Turn the power switch to ON to turn on the DVR.
At startup, the system performs a basic system check and runs an initial loading sequence.
After a few moments, the system loads a live display view and prompts you to create a
new, secure 6 character password.

5.6 Step 6: Creating a New, Secure Password

When using your system for the first time, you will be prompted to create a new, secure 6
character password.
• Enter a new, secure 6 character password for the DVR and click OK. Record your pass-
word and store it in a secure place, this password will be used to connect to your sys-
tem from now on.
#LX400100; r.46796/46796; en-US
9