Step 4: Connect The Monitor; Step 5: Connect The Power Adapter To Power The Nvr - FLIR DNR110 Series Instruction Manual

6 Basic Setup (DNR110 Series)

6.4 Step 4: Connect the Monitor

• Connect an HDMI cable (not included) from the HDMI port to the TV or monitor
(recommended).
OR
• Connect a VGA cable (not included) from the VGA port to the monitor.
1. HDMI port.
2. VGA port.

6.5 Step 5: Connect the Power Adapter to Power the NVR

• Connect the included DC 48V power adapter to the NVR and connect the other end to
a power outlet or surge protector. The NVR powers on automatically.
#LX400068; r. 1.0/27398/27398; en-US
9